ScalarArray(3)
NAME
IO::ScalarArray - IO:: interface for reading/writing an array of
scalars
SYNOPSIS
Perform I/O on strings, using the basic OO interface...
use IO::ScalarArray;
@data = ("My mes", "sage:\n");
### Open a handle on an array, and append to it:
$AH = new IO::ScalarArray \@data;
$AH->print("Hello");
$AH->print(", world!\nBye now!\n");
print "The array is now: ", @data, "\n";
### Open a handle on an array, read it line-by-line, then close it:
$AH = new IO::ScalarArray \@data;
while (defined($_ = $AH->getline)) {
print "Got line: $_";
}
$AH->close;
### Open a handle on an array, and slurp in all the lines:
$AH = new IO::ScalarArray \@data;
print "All lines:\n", $AH->getlines;
### Get the current position (either of two ways):
$pos = $AH->getpos;
$offset = $AH->tell;
### Set the current position (either of two ways):
$AH->setpos($pos);
$AH->seek($offset, 0);
### Open an anonymous temporary array:
$AH = new IO::ScalarArray;
$AH->print("Hi there!");
print "I printed: ", @{$AH->aref}, "\n"; ### get at value
Don't like OO for your I/O? No problem. Thanks to the magic of an
invisible tie(), the following now works out of the box, just as it
does with IO::Handle:
use IO::ScalarArray;
@data = ("My mes", "sage:\n");
### Open a handle on an array, and append to it:
$AH = new IO::ScalarArray \@data;
print $AH "Hello";
print $AH ", world!\nBye now!\n";
print "The array is now: ", @data, "\n";
### Open a handle on a string, read it line-by-line, then close it:
$AH = new IO::ScalarArray \@data;
while (<$AH>) {
print "Got line: $_";
}
close $AH;
### Open a handle on a string, and slurp in all the lines:
$AH = new IO::ScalarArray \@data;
print "All lines:\n", <$AH>;
### Get the current position (WARNING: requires 5.6):
$offset = tell $AH;
### Set the current position (WARNING: requires 5.6):
seek $AH, $offset, 0;
### Open an anonymous temporary scalar:
$AH = new IO::ScalarArray;
print $AH "Hi there!";
print "I printed: ", @{$AH->aref}, "\n"; ### get at value
And for you folks with 1.x code out there: the old tie() style still
works, though this is unnecessary and deprecated:
use IO::ScalarArray;
### Writing to a scalar...
my @a;
tie *OUT, 'IO::ScalarArray', \@a;
print OUT "line 1\nline 2\n", "line 3\n";
print "Array is now: ", @a, "\n"
### Reading and writing an anonymous scalar...
tie *OUT, 'IO::ScalarArray';
print OUT "line 1\nline 2\n", "line 3\n";
tied(OUT)->seek(0,0);
while (<OUT>) {
print "Got line: ", $_;
}
DESCRIPTION
This class is part of the IO::Stringy distribution; see IO::Stringy for
change log and general information.
The IO::ScalarArray class implements objects which behave just like
IO::Handle (or FileHandle) objects, except that you may use them to
write to (or read from) arrays of scalars. Logically, an array of
scalars defines an in-core "file" whose contents are the concatenation
of the scalars in the array. The handles created by this class are
automatically tiehandle'd (though please see "WARNINGS" for information
relevant to your Perl version).
For writing large amounts of data with individual print() statements,
this class is likely to be more efficient than IO::Scalar.
Basically, this:
my @a;
$AH = new IO::ScalarArray \@a;
$AH->print("Hel", "lo, "); ### OO style
$AH->print("world!\n"); ### ditto
Or this:
my @a;
$AH = new IO::ScalarArray \@a;
print $AH "Hel", "lo, "; ### non-OO style
print $AH "world!\n"; ### ditto
Causes @a to be set to the following array of 3 strings:
( "Hel" ,
"lo, " ,
"world!\n" )
See IO::Scalar and compare with this class.
PUBLIC INTERFACE
Construction
new [ARGS...]
Class method. Return a new, unattached array handle. If any argu-
ments are given, they're sent to open().
open [ARRAYREF]
Instance method. Open the array handle on a new array, pointed to
by ARRAYREF. If no ARRAYREF is given, a "private" array is created
to hold the file data.
Returns the self object on success, undefined on error.
opened
Instance method. Is the array handle opened on something?
close
Instance method. Disassociate the array handle from its underlying
array. Done automatically on destroy.
Input and output
flush
Instance method. No-op, provided for OO compatibility.
getc
Instance method. Return the next character, or undef if none
remain. This does a read(1), which is somewhat costly.
getline
Instance method. Return the next line, or undef on end of data.
Can safely be called in an array context. Currently, lines are
delimited by "\n".
getlines
Instance method. Get all remaining lines. It will croak() if
accidentally called in a scalar context.
print ARGS...
Instance method. Print ARGS to the underlying array.
Currently, this always causes a "seek to the end of the array" and
generates a new array entry. This may change in the future.
read BUF, NBYTES, [OFFSET];
Instance method. Read some bytes from the array. Returns the num-
ber of bytes actually read, 0 on end-of-file, undef on error.
write BUF, NBYTES, [OFFSET];
Instance method. Write some bytes into the array.
Seeking/telling and other attributes
autoflush
Instance method. No-op, provided for OO compatibility.
binmode
Instance method. No-op, provided for OO compatibility.
clearerr
Instance method. Clear the error and EOF flags. A no-op.
eof Instance method. Are we at end of file?
seek POS,WHENCE
Instance method. Seek to a given position in the stream. Only a
WHENCE of 0 (SEEK_SET) is supported.
tell
Instance method. Return the current position in the stream, as a
numeric offset.
setpos POS
Instance method. Seek to a given position in the array, using the
opaque getpos() value. Don't expect this to be a number.
getpos
Instance method. Return the current position in the array, as an
opaque value. Don't expect this to be a number.
aref
Instance method. Return a reference to the underlying array.
WARNINGS
Perl's TIEHANDLE spec was incomplete prior to 5.005_57; it was missing
support for "seek()", "tell()", and "eof()". Attempting to use these
functions with an IO::ScalarArray will not work prior to 5.005_57.
IO::ScalarArray will not have the relevant methods invoked; and even
worse, this kind of bug can lie dormant for a while. If you turn warn-
ings on (via $^W or "perl -w"), and you see something like this...
attempt to seek on unopened filehandle
...then you are probably trying to use one of these functions on an
IO::ScalarArray with an old Perl. The remedy is to simply use the OO
version; e.g.:
$AH->seek(0,0); ### GOOD: will work on any 5.005
seek($AH,0,0); ### WARNING: will only work on 5.005_57 and beyond
VERSION
$Id: ScalarArray.pm,v 2.103 2001/08/09 08:04:44 eryq Exp $
AUTHOR
Principal author
Eryq (eryq@zeegee.com). President, ZeeGee Software Inc
(http://www.zeegee.com).
Other contributors
Thanks to the following individuals for their invaluable contributions
(if I've forgotten or misspelled your name, please email me!):
Andy Glew, for suggesting "getc()".
Brandon Browning, for suggesting "opened()".
Eric L. Brine, for his offset-using read() and write() implementations.
Doug Wilson, for the IO::Handle inheritance and automatic tie-ing.
perl v5.8.6 2001-08-09 IO::ScalarArray(3)
Man(1) output converted with
man2html